Method A // Integrated Wi-Fi Requires a wireless router with an Internet connection. When you have completed your system setup, you can generate and email a summary report. For information about using Ethernet and/or PLC bridges, refer to the Enphase IQ Envoy Installation and Operation Manual at: /support. E ) On the IQ Envoy, if the AP Mode LED is not lit, press the AP Mode button.ġ1 Connect to Enlighten 12 Send System Summary Report This section describes using the IQ Envoy integrated Wi-Fi or the Mobile Connect modem.

D ) Turn on the circuit feeding the combiner. Once all screws are partially tightened, go back and tighten each one completely. Start all of the screws, but do not completely tighten them. B ) Re-install the clear plastic deadfront. To do this, you must create a protected route using conduit for the CT wires from the main load center to the IQ Envoy.Ĩ Energize the IQ Envoy A ) Close the terminal block door, and secure it with the screw. You can install two optional split-core CTs to provide consumption metering. One solid-core current transformer (CT) is provided for production metering. The combiner comes with three 20A circuit breakers (16A continuous) to which you must wire the device AC branch circuits.ħ Install CTs for Consumption Metering (optional) The IQ Envoy inside the IQ Combiner is pre-wired at the terminal blocks for power and production metering connections. However, never install below three feet (0.9 meters) off the ground.ĥ Wire the Output Connections 6 Wire Inputs from the AC Branch Circuits A ) Use conductors sized per local code requirements (output lug is rated for 14 to 4 AWG copper conductors for combined output) taking into consideration the voltage drop/rise and upstream breaker or fuse. The best practice is to install at least four feet (1.2 meters) off the ground. 1 Choose a location for the IQ Combiner A ) Install the IQ Combiner in a readily accessible location. Safety warnings are listed on the back of this guide.ģ Remove an Unused Circuit Breaker (optional) INSTALLATION - Part 1 You can complete Installation Part 1 before or after installing Enphase Microinverters and/or Batteries. To install the Enphase IQ Combiner, read and follow all warnings and instructions in this Guide and in the Enphase IQ Envoy Installation and Operation Manual at: / support. QUICK INSTALL GUIDE (Model X-IQ-AM1-240-B) Installing the Enphase IQ Combiner The Enphase IQ Combiner™ combines up to three AC branch circuits of Enphase Batteries, IQ 6 Microinverters, or IQ 6+ Microinverters.

Enphase enlighten how to connect to wps